The button is dimmed because you did not make any changes. Use the 窶廚ancel窶-button to dismiss the dialog.
Mt. Everything窶冱 built-in SCSI-Driver will be used to mount volumes from all disks which do not have an active driver running on your Mac.
Uncheck if you don窶冲 want to see standard compliance information in the main window.
Click to have Mt.ﾂ Everything indicate the SCSI standard compliance of devices in the 窶弋ype窶-column of the main window.
These options allow you to specify the general behaviour of Mt.ﾂ Everything.
Click here to select the key combination you want to use as hotkey. The current setting is shown in this box.
The hotkey will load next time you start your Macintosh
Check to have the 窶廴ount everything you can find窶 hotkey loaded next time you start your Macintosh.
These options let you customize the behavior of Mt. Everything窶冱 窶廴ount窶-command and the hotkey.
The options below define how Mt.ﾂ Everything窶冱 窶彜top Unit窶-command works.
Mt.ﾂ Everything窶冱 driver will use hardware handshake which is the fastest transfer mode.
If you encounter problems on data transfers uncheck this option.
This option works only in combination with Mt.ﾂ Everything窶冱 built-in SCSI-driver.
If checked Mt. Everything窶冱 built-in SCSI-Driver will use hardware handshake when transferring data through the SCSI bus.
This option does not effect copies of the driver already loaded.
Mt. Everything窶冱 built-in SCSI-Driver will be used to mount volumes from removable media disks only.
Use Mt. Everything窶冱 built-in SCSI-Driver to mount volumes from removable media disks only.
For fixed disks the driver installed on the disk will be used.
Tells Mt. Everything to use its own built-in SCSI-Driver to mount volumes from all disks which do not have an active driver running on your Mac (e.g. if there has no volume been mounted from that disk).
Mt. Everything will use the SCSI-Driver installed on the disk to mount volumes from that disk.
Tells Mt. Everything to use the SCSI-Driver installed on the disk to mount volumes from that disk.
You should use this option because the driver found on the disk is typically the one from the disk窶冱 vendor and is best suited for that disk.
Mt.ﾂ Everything will try to unmount all volumes on a drive before stopping it.
If unmounting a volume fails the drive won't get stopped and all the volumes will be available on your desktop.
Click this button to tell Mt.ﾂ Everything to first unmount all volumes on a drive before stopping the drive.
If any volume on the drive is busy none will be unmounted and the drive won't stop.
When you choose 窶彜top Unit窶 Mt.ﾂ Everything won't bother to unmount any volume found on the selected drive.
Note that your Mac might hang when the Finder or any other applicatoin accesses a volume on that drive.
Select this option if you want Mt.ﾂ Everything to ignore any mounted volume when stopping a unit. THIS MAY MAKE THE MAC HANG!
This option is usefull only with 窶彜leep窶-compatible PowerBook disk drivers.
This button is dimmed because the current settings are the same as the default ones.
Click me to restore the default settings
Revert the changes in this dialog.
This button is dimmed because you did not make any changes.
Click here or type 窶廚ommand-.窶 to revert all changes and close this dialog.
Click or hit 窶彝eturn窶 or 窶廢nter窶 to accept the choices you made and close the dialog. Changes will take effect immediately.
